Swirl Remover

How is this different from the 3-step system? Swirl remover is a combination of abrasives and fillers to help you quickly manage polishing jobs with minimal effort. The 3-step system contains no fillers and is designed for compounding and polishing to get paint into absolutely perfect condition.

Is this body shope safe (silicone free)? No, Swirl Remover is not body shop safe, however, everything in our 3-step polishing system is body shop safe and with not cause fisheyes in fresh paint.

Will Swirl Remover remove scratches? Swirl Remover is designed for removing paint swirl marks (sometimes called spider webs) and can remove very miner scratches. Deeper scratches must be compounded with ExoForma Quick Cut Compound.

Do I need a polisher to use Swirl Remover? No, a polisher isn't necessary but can be used in order to see the effects of Swirl Remover even quicker with less effort. Swirl Remover can be used by hand, with a dual action polisher, a rotary polisher, or a polishing attachment on a drill.

For use with a polisher ExoForma Swirl Remover works best with a light cutting or finishing pad. Spread 3-5 pea sized drops across a 2' x 2' surface. Buff on medium speed applying enough pressure to remove the light imperfections. Slowly ease up as gloss is achieved; if the product starts to gum, too much product is being used. If the imperfections are not removed, you may need to use the ExoForma 3-Step Paint Polishing System to remove more severe imperfections.

For use by hand If you do not have access to a polisher, you can apply ExoForma Swirl Remover by hand. Put 3 to 5 pea sized drops on an ExoForma Hex Grib Applicator. Vigorously rub in circles, applying about 10 pounds of pressure and slowly lightening up until gloss is achieved. Repeat as necessary. Swirl Remover is a combination of polish and fillers so some of the scratches will be polished out while others will be filled with the silicone fillers.