ExoForma's Premium Foam Cannon is the best money can buy. With adjustment dials for foam thickness, and spout angle, you can quickly get your vehicle covered in a thick, rich lather so it's ready to be washed.

Connects to all standard pressure washers with 1/4 in. quick connect attachment
1 liter bottle capacity
Heavy duty brass that won't rust

Description
Overview
Using a foam cannon is the obvious choice when washing a car where you want to protect the finish. Using a bucket when you are constantly dipping a wash mitt back into the dirty water can result in the wash mitt getting filled with debris. Once the mitt is filled with debris, it will cause scratching to the surface of your vehicle as it is moved across the surface for washing. That is why you will see that all professional detailers use a foam cannon for washing.
- Reduce marring caused by using recycled water in a bucket
- Use less total water compared to using a bucket
- Clean your vehicle in less time
- Reduce the likelihood of water spots from the reduced time it takes to wash
How to use it

Directions:

Our Snub Nose requires a pressure washer. Simply use the external end on your pressure washer and connect it to our Snub Nose. It connects via a M22x1.5 inlet piece.
Questions

Questions:

Does this connect to my pressure washer?
This foam cannon attaches to all standard quick connect attachments. If your pressure washer doesn't have a quick connect attachment, simply at the snub nose attachment.

Can I put any soap in the foam cannon?
Yes. Some soaps will foam up more than others. Our Shield Shampoo and Foam Soap are specially formulated to create more foam but you will still see a good amount of foam come from regular soaps.

How much soap do I need to use?
For thick, rich foam we recommend putting 4 ounces of soap in the cannon. Then fill the

How do I change the angle the foam comes out at?
To change the angle from a narrow stream to a wide stream, simply rotate the nozzle at the end of the cannon until you get the angle you desire.

Can I change the amount of foam that comes out?
Yes. To change how thick the foam coming out of the cannon is, twist the nob on top of the foam cannon until you get the amount of foam you desire. For maximum foam, twist the knob clockwise as far as you can.

Description

Overview

How to use it

Directions:

Questions

Questions:

Brushes & Detail Tools

Subscribe