Graphene Spray Coating

Directions:

- Properly prep the vehicle by removing any sealants, waxes, or anything tlese that may interefere with Graphene Spray Coating from bonding directly to the clear coat.

- For best results, it is recommended (but not required) you clay bar, decontaminate and polish your vehicle's surface to remove any existing scratches, swirls, or imperfections.

- Apply ExoForma Graphene Spray Coating to a microfiber towel, suede applicator, or spray directly onto the surface of the vehicle. Wipe the coating into the surface in a cross hatch pattern to ensure complete and even coverage. Do not overuse product as it may result in "high spots" that will be foggy in appearance.

- Once the product begins to "flash" or rainbow, allow it to sit on the surface for 3-5 minutes.

- With a clean microfiber towel, wipe off any excess coating, making sure that there is no residue left behind.

- Allow 12-24 hours for the coating to fully cure before any water is introduced to it and allow a week before any chemicals are.

Questions:

- How long does Graphene Spray Coating Last?
Though results can vary greatly based on the driving and storing conditions of the vehicle, you can typically expect to get 14-18 months longevity out of 1 coat.

- How long is the flash time?
You will typically begin to see the product flash, or rainbow, but it is recommended you let the coating sit on the vehicle for about 60 seconds before wiping off. You can leave it on the panel for as long as 10 minutes before it starts to get difficult to remove.