IMPORTANT: It is recommended that you wear gloves during application to ensure the product does not get on your hands.

1. Prep the surface you intend to restore by thoroughly cleaning and drying it.
2. Tape off any adjacent chrome or painted areas. If you happen to get any product on a painted or chrome area, make sure to wipe it off immediately with a microfiber towel.
3. Dab several drops of ExoForma Black Plastic and Trim Restorer onto the applicator and apply a thin, even coat to the plastic or trim piece. Let the product sit on the surface for 5 minutes.
4. Wipe off any excess product and let cure for 4-6 hours before exposing restored surfaces to any water or moisture.

Depending on the condition of the plastic or trim that was restored, you may need to repeat steps 3 and 4 again to achieve the desired results.

There are a lot of variables that can determine how long your Black Trim Restorer will last. Most people experience between 3-6 months of longevity depending on how many miles you drive, what the driving conditions are, and where your car is stored (in direct sunlight).

How long a bottle lasts can vary greatly depending on how thick of a layer you put on and how much trim your car has. Applying more layers will give you a much longer lasting restoration but will use more product.