Learn / How-To

Ceramic Shield Application Instructions:

Make sure the surface is clean of any wax, polish, or solvent and is dried before application. Spray Ceramic Shield onto 1 panel or small area at a time. A little goes a long way so only a few squirts will be needed. Quickly wipe Ceramic Shield around, covering all parts of the surface with a microfiber towel. Once the surface is fully covered, wipe dry with a separate clean, dry microfiber towel.

Tips: Try to let the product sit on the surface for no longer than 1 minute before you wipe it off. You can keep reusing the initial towel throughout your application, but it is recommended that you use dry sections of fresh microfiber towels for wiping the surface dry. If you want to apply multiple layers to amplify the effects and make Ceramic Shield last even longer, wait 2 hours between coats.

Stay connected with us